Features
SaunaLife TITAN SL1 High-Performance Gas Sauna Heater, Portable
- No Electric and No Installation Costs – Easy propane (LP) hookup – just load the stones
- Fast Heat-Up Times – Optimal thermal conversion provides sauna-ready temperatures in under 30 minutes
- Sauna Anywhere – Pair with the SaunaTrekker or SaunaTrekker XL Sauna Tent for sauna-anywhere portability
- Optimal Thermal Efficiency – MORE HEAT to the stones
- Exceptional Steam Output – Heat transfer technology keeps its ideal 44-pound stone mass hotter for longer
- Finnish Engineering – Developed through a collaboration between Finnish Sauna Artisans and SaunaLife
- Low Operating Costs – Expect 15-25 hours of sauna on a 20-pound propane tank (pennies per sauna session)
- Advanced Safety Features – A tip switch, integrated oxygen sensor, and 60-minute duration timer all act to cut the gas supply
- Built to Last – Solid stainless steel and brass construction at only 33 pounds
- Adjustable Power – Operates at 4.5-8.1kW (15,300-27,600 BTU) to dial in on optimal sauna comfort
- Compact Size – 13.1”W (33.2cm) x 19.6”D (49.7cm) x 27”H (68.6cm)
- True SaunaLife Living – Pull it from the backyard sauna and take it to a neighborhood party or lake house for the ideal tent sauna experience – one heater, unlimited potential
Specifications
| TITAN SL1 Specifications |
| Model |
TITAN SL1 |
| Construction Material |
Stainless Steel and Brass |
| Fuel Type |
Propane (LP) |
| Propane Gas Hose Length |
6' |
| Efficiency |
15-25 Hours of Sauna w/ a 20-lb Propane Tank (Dependent on Room Size and Use) |
| Ventilation Intake |
Fixed Open, 52 sq. in. |
| Ventilation Exhaust |
Fixed Open to the Outdoors, 39 sq. in. |
| Power Output (BTU) |
15,300-27,600 BTU (Adjustable) |
| Power Output (kW) |
4.5-8.1kW (Adjustable) |
| Uninsulated Room Size |
140-350 cu. ft. |
| Insulated Room Size |
140-425 cu. ft. |
| Heat Settings |
High and Low |
| Timer |
60-Minute Duration Silent Timer |
| Stone Size |
1" to 2" (3-5 cm) |
| Stone Capacity |
44 lbs (20 kg) |
| Safety |
Internal Tip Switch, Oxygen Depletion System, Heater Guard, Gloves |
| Safety Distance |
6" (Stone Cage to Combustible Materials) |
| Safety Distance w/ Heat Shield |
4" (Stone Cage to Combustible Materials) |
| Dimensions |
13.1"W (33.2 cm) x 19.6"D (49.7 cm) x 27"H (68.6 cm) |
| Weight w/o Stones |
33 lbs (15 kg) |
Includes
- Gas Sauna Heater
- Stone Basket
- Radiant Heat Chamber
- Heater Base
- Propane Regulator and Hose, 6'
- Gloves
- Heater Guard
- Installation and Operation Manual
Manual
Description
The SaunaLife TITAN SL1 is a portable propane gas sauna heater designed for outdoor sauna cabins and approved SaunaLife sauna tents. It uses propane (LP) fuel instead of electricity and provides adjustable heating from 4.5 to 8.1 kW, making it suitable for insulated sauna spaces from 140 to 425 cu. ft. and uninsulated spaces from 140 to 350 cu. ft.
TITAN SL1 Product Highlights
-
Portable Propane Design: Runs on propane (LP) and does not require an electrical connection.
-
Adjustable 4.5–8.1 kW Output: Choose between low and high heat settings to suit the sauna space and desired heat level.
-
Fast Heat-Up: The manufacturer states that the heater can bring most saunas to bathing temperature in under 30 minutes.
-
44-Lb. Stone Capacity: The stone basket holds up to 44 pounds of sauna stones for heat retention and steam production.
-
Built-In Safety Features: An oxygen depletion system and internal tip switch help interrupt gas flow when unsafe operating conditions are detected. A 60-minute timer also limits operating time.
-
Durable Construction: The heater uses stainless steel and brass components and weighs 33 pounds without stones.
-
Compact Design: With dimensions of 13.1 W × 19.6 D × 27 H inches, the TITAN SL1 is designed for efficient use of space.
-
Portable Setup: The heater includes a propane regulator and 6-foot hose, heater guard, gloves, stone basket, heat chamber, and base.
Why Choose the TITAN SL1 Propane Gas Sauna Heater?
The SaunaLife TITAN SL1 propane gas sauna heater provides an alternative to conventional electric sauna heaters for outdoor installations where running a dedicated electrical circuit may not be practical. Since it uses propane, the heater can operate without an electrical connection while still providing adjustable heat and a substantial stone mass for traditional sauna bathing.
The TITAN SL1 is also designed with portability in mind. At 33 pounds without stones, it can be moved between compatible outdoor sauna setups when properly cooled, disconnected, and handled according to the manufacturer's instructions. Its compact design makes it suitable for both permanent outdoor sauna cabins and approved SaunaLife tent applications.
The heater provides:
- Propane-powered operation without an electrical connection
- 4.5–8.1 kW of adjustable heating output
- 44 pounds of stone capacity
- 60-minute operating timer
- Oxygen depletion and tip-over protection
- Compatibility with SaunaLife SaunaTrekker sauna tents
- Suitability for insulated and uninsulated sauna cabins within its specified volume range
What Size Sauna Is the TITAN SL1 Suitable For?
The TITAN SL1 sauna heater is rated for sauna spaces from 140 to 350 cubic feet when uninsulated and 140 to 425 cubic feet when insulated. Its adjustable 4.5–8.1 kW output allows the heat level to be adjusted according to the sauna's size and operating conditions.
When sizing a sauna for a gas powered sauna heater, consider more than the room's basic dimensions. The sauna’s insulation, ventilation, ceiling height, glazing, and heat-loss characteristics can all affect how quickly and effectively it heats. The sauna must also provide the ventilation and safety clearances specified in the TITAN SL1 installation manual.
Using the TITAN SL1 With SaunaTrekker Tents
The SaunaLife TITAN SL1 gas sauna heater is designed for use with SaunaLife's SaunaTrekker and SaunaTrekker XL sauna tents. These tents are specifically designed around the heater's ventilation and placement requirements.
For tent use, follow the manufacturer's requirements carefully:
- Use only a SaunaLife-approved SaunaTrekker tent designed for the TITAN SL1.
- Do not use the heater in third-party, modified, or substitute sauna tents.
- Place the heater in the designated corner containing the lower ventilation intake.
- Keep all required ventilation openings open and unobstructed.
- Position the heater on a solid, level surface that is resistant to heat and combustion, such as a stone paver. Do not place it directly on grass.
- The heater requires at least 6 inches of clearance on each side and behind it, plus 16 inches of space in front.
- Keep the propane cylinder outside the sauna tent.
- Do not modify the tent in a way that affects ventilation, clearances, or safe operation.
The manufacturer specifically states that the TITAN SL1 is intended for the SaunaTrekker tent and should not be installed in third-party or modified tents. The same compatibility is marketed for the SaunaTrekker XL, which is designed around the TITAN SL1.
Installation and Propane Requirements
The TITAN SL1 is a propane sauna heater and must be installed and operated according to its manufacturer-supplied installation manual.
Propane/LP Fuel
The heater is designed for propane (LP) gas only. It includes a propane regulator and 6-foot hose. The supplied regulator must be used as provided, and the regulator connects directly to the propane cylinder valve.
Propane Tank
The TITAN SL1 can operate for approximately 15 to 25 hours on a standard 20-pound propane tank, depending on operating conditions. The propane cylinder must remain outside the sauna room or tent, upright, secured, and in a well-ventilated location.
Outdoor Use
The TITAN SL1 can be used in an outdoor sauna cabin when all specified fuel, ventilation, clearance, and installation requirements are met. It can also be used with the approved SaunaTrekker tent system.
Ventilation and Clearance
Proper natural ventilation is essential because the TITAN SL1 is a fuel-burning appliance. The installation manual specifies a minimum free area of 52 sq. in. for the lower air intake and 39 sq. in. for the upper air outlet. The exhaust must discharge directly outdoors and must not terminate in another room or enclosed area.
For a sauna cabin, the heater requires at least:
- 6 inches on the left and right
- 6 inches at the rear
- 16 inches at the front
- 50 inches from the ceiling
An optional heat shield can reduce the side and rear cabin clearances to 4 inches, while the front and ceiling clearances remain unchanged.
Manufacturer and Local Requirements
Installation should be performed by someone familiar with fuel-burning appliances and gas safety practices. Local building codes or regulations may require installation by a licensed or qualified professional, so verify applicable requirements before installation.
TITAN SL1 Propane Gas Sauna Heater vs. Electric Sauna Heaters
The TITAN SL1 and electric sauna heaters use different energy sources and have different installation considerations.
| Feature |
TITAN SL1 Propane Gas Heater |
Electric Sauna Heater |
| Fuel source |
Propane (LP) |
Electricity |
| Electrical connection |
Not required |
Required |
| Portability |
Designed for portable use |
Generally installed in a fixed location |
| Heating output |
4.5–8.1 kW |
Varies by model |
| Sauna stones |
44-lb. capacity |
Varies by model |
| Installation considerations |
Propane supply, ventilation, clearances, and local gas requirements |
Electrical circuit, wiring, controls, and local electrical requirements |
| Tent compatibility |
SaunaLife SaunaTrekker and SaunaTrekker XL |
Depends on the specific tent and heater |
The TITAN SL1 can be useful for outdoor sauna setups where propane operation and portability are priorities. Electric sauna heaters may be more suitable when a properly sized electrical connection is already available and a permanent heater installation is preferred.
FAQs
What type of fuel does the SaunaLife TITAN SL1 use?
The SaunaLife TITAN SL1 uses propane (LP) gas only. It includes a propane regulator and 6-foot hose for connection to the propane supply.
How quickly does the TITAN SL1 heat a sauna?
The manufacturer states that the TITAN SL1 can heat most saunas to bathing temperature in less than thirty minutes. Actual heat-up time varies with sauna size, insulation, ventilation, outdoor conditions, and operating settings.
Can the TITAN SL1 be used with a sauna tent?
The TITAN SL1 is designed for use with the SaunaLife SaunaTrekker and SaunaTrekker XL sauna tents. The manufacturer requires the use of an approved SaunaTrekker tent and does not permit installation in third-party, modified, or substitute tents.
How many sauna stones does the TITAN SL1 hold?
The TITAN SL1 has a 44-pound stone capacity. It is designed to hold 1- to 2-inch sauna stones.
How long does a 20-pound propane tank last with the TITAN SL1?
A standard 20-pound propane tank offers approximately 15 to 25 hours of sauna operation, with actual runtime varying by sauna size and heater output.
How much heating power does the TITAN SL1 provide?
The TITAN SL1 provides adjustable heating output from 4.5 to 8.1 kW, with a maximum output of approximately 27,600 BTU.
What safety features does the TITAN SL1 have?
The SaunaLife Titan sauna heater includes an internal tip switch, oxygen depletion system, 60-minute timer, and heater guard. The included safety systems are designed to interrupt gas flow under specified unsafe conditions.
Is the TITAN SL1 portable?
Yes. The portable sauna heater weighs 33 pounds without stones and does not require an electrical connection.
Its compact design allows it to be moved between suitable outdoor sauna setups when the heater is properly shut down, cooled, and disconnected.
What is included with the SaunaLife TITAN SL1?
The package includes the gas sauna heater, stone basket, radiant heat chamber, heater base, propane regulator and 6-foot hose, gloves, heater guard, and installation and operation manual. Sauna stones and optional accessories are purchased separately.
What ventilation does the TITAN SL1 require?
The SaunaLife TITAN sauna heater requires natural ventilation with a lower air intake providing at least 52 sq. in. of free area and an upper air outlet providing at least 39 sq. in. of free area.
The upper exhaust must discharge directly outdoors, and ventilation openings must remain unobstructed while the outdoor sauna heater is operating.
Which sauna tents are compatible with the TITAN SL1?
The TITAN SL1 is compatible with the SaunaLife SaunaTrekker and SaunaTrekker XL sauna tents. For safe operation, use the manufacturer's approved tent configuration and follow the specified heater placement, ventilation, propane, and clearance requirements.
Does the SaunaLife TITAN SL1 require electricity?
No. The TITAN SL1 is powered by propane (LP) and does not require an electrical connection.
How much heat does the SaunaLife TITAN SL1 produce?
The heater provides adjustable output from 4.5 to 8.1 kW, equivalent to a maximum of approximately 27,600 BTU.
Does the TITAN SL1 need a chimney?
The TITAN SL1 does not use a conventional chimney system. However, it is a fuel-burning appliance and requires the ventilation, air intake, exhaust, clearances, and installation conditions specified by the manufacturer.
Can the TITAN SL1 be used in an outdoor sauna?
The TITAN SL1 can be installed in an outdoor sauna cabin when the required safety clearances, ventilation, propane supply, non-combustible base, and other manufacturer requirements are met. Local building and gas regulations should also be checked before installation.
